Book diagnostics, maintenance and mechanical repair for Ferrari, Lamborghini, Maserati, Alfa Romeo, Fiat and Abarth vehicles. We inspect the actual fault, explain the suitable repair options and provide a written estimate before work begins.
Fault finding, servicing and repair for Italian performance, luxury and everyday cars.
A warning light, noise or loss of performance can come from more than one system. We begin with the complaint and test the relevant components before replacing parts. This gives you a repair decision based on the vehicle rather than a generic service package.
We inspect oil or coolant leaks, overheating, rough running, smoke, misfires, low power, unusual noises and warning lights. Testing may include fault-code reading, live data, pressure checks, ignition or fuel checks and a physical inspection before the repair is quoted.
Book an inspection for delayed engagement, harsh shifts, clutch slip, shudder, fluid leaks, warning messages or driveline vibration. Automatic, dual-clutch, automated manual and conventional manual systems need different fluid, setup and diagnostic procedures.
We repair brake noise, vibration, pulling, warning lights, worn pads and discs, leaking dampers, failed bushes, uneven ride height and steering instability. Performance brake and adaptive suspension specifications are checked before parts are ordered.
Weak cooling, warm air, odor, compressor noise and refrigerant leaks require more than a gas top-up. We inspect pressures, temperature response, visible leaks, fans and controls. Engine cooling checks cover radiators, pumps, thermostats, hoses and related faults.
Italian cars can combine several control modules and networked systems. We investigate battery drain, starting faults, intermittent warnings, sensor problems, lighting issues and failed accessories with code data, voltage checks and targeted circuit testing.
Oil service, filters, spark plugs, drive belts, fluids and inspection items are selected for the model and service requirement. We note urgent faults separately from maintenance that can be planned, helping you approve the work in a sensible order.
Italian vehicles range from compact city cars and commercial vehicles to high-output supercars. Use the dedicated brand page for model-specific service and booking guidance.
Performance engines, transmissions, active suspension and tightly packaged cooling systems require careful diagnosis. Review our Ferrari repair and Lamborghini repair pages.
For Maserati sedans, SUVs and GT models, use our Maserati repair page. Rare performance vehicles can begin with the Pagani repair route.
Giulia, Stelvio, Giulietta, Tonale and performance compact models may need brand-specific oil, turbo, cooling, transmission and suspension checks. See Alfa Romeo repair and Abarth repair.
For passenger vehicles, classics and commercial models, use our Fiat repair, Lancia repair and IVECO repair pages.
The model and a short description of the problem are enough to contact us. Additional vehicle details may be requested later when needed for parts matching or diagnosis.
These estimates help you plan common work. They are not fixed prices for every Italian vehicle. The final total depends on the brand, model, fault, parts selection, access time and testing required. Your written quote confirms the work and complete approved total.
| Service | Estimated total | Typical scope | Main price variables |
|---|---|---|---|
| Computer fault scan and initial diagnosis | AED 250 to 650 | Relevant scan, basic live data and initial physical checks | System complexity and additional testing |
| Engine oil and filter service | AED 550 to 2,200 | Correct oil quantity, suitable filter and service inspection | Brand, oil specification and capacity |
| Front brake pads | AED 900 to 4,500 | Pad replacement, fitting labor and brake check | Caliper type, pad grade and wear sensors |
| AC diagnosis and leak testing | AED 350 to 900 | Pressure, temperature, control and accessible leak checks | Refrigerant, fault depth and component access |
| Suspension repair | AED 1,200 to 8,000+ | Agreed arms, bushes, dampers or related components | Adaptive systems, axle scope and parts choice |
| Transmission repair | AED 3,500 to 18,000+ | Approved service, clutch, control or internal repair scope | Transmission type, damage and programming |
VAT treatment and significant exclusions should appear on the written estimate. Fluids, seals, programming, alignment and road testing are included only when stated for that job. If dismantling reveals additional damage, we explain the finding and revised price before extra work begins.
Not every warning needs a major component. Some concerns are solved through maintenance or a focused repair. Others require dismantling because the fault has damaged internal parts. Our quote separates the options so you can compare cost, expected result and urgency.
Suitable when the vehicle is operating normally and scheduled fluids, filters, plugs or inspection items are due. A service is not presented as a cure for a confirmed mechanical fault.
Suitable when testing identifies a specific failed seal, hose, sensor, mount, arm, pump, valve or electrical circuit. Related damage and required calibration are included where applicable.
Suitable when internal engine, transmission or driveline damage is confirmed. We explain dismantling, parts, machining or specialist work, fluids, setup and testing before approval.
A clear diagnosis prevents routine service items from being confused with the repair that solves the complaint.
Arrange transport when the car overheats, loses oil or coolant rapidly, has very low oil pressure, shows a serious brake warning, loses steering assistance, produces heavy smoke, makes severe mechanical noise or cannot select a gear safely. Continued driving can turn a repairable fault into major engine, transmission or safety-system damage.
Tell us the model, warning message, noise or behavior and whether the car still moves safely. A photo or short video can help the first conversation, but you do not need to diagnose the vehicle yourself.
Switch off promptly if overheating, oil-pressure loss or a sudden fluid leak occurs. Do not repeatedly restart an engine with loud knocking, heavy smoke or visible loss of oil or coolant.
Free pickup and delivery are available. The suitable transport method depends on whether the car can be moved safely. Share the location and symptoms so the team can arrange the next step.
A fault code identifies the system that noticed a problem, not always the failed component. The inspection combines the customer’s complaint, physical condition and test results. This is especially important when a weak battery, wiring problem or another system creates several warning messages.
We record when the concern occurs, whether the engine is cold or warm, and any recent work. A controlled road test is used only when the vehicle is safe to drive.
Visible leaks, fluid condition, wiring, mounts, hoses, belts and nearby components are checked according to the symptom. This helps prevent a related fault from being missed.
Scan data, voltage, pressure, temperature, smoke testing or mechanical measurements may be used. The exact tests depend on the system and access available.
You receive the recommended work and estimate before repair. After completion, relevant stationary checks, fault-code review, fluid checks and road testing support the handover.
These are estimated repair scenarios, not claims about completed customer vehicles. They show how the model, fault and parts scope affect the total.
Work: Replace front brake pads and wear sensor, inspect discs and calipers, clean fitting surfaces and complete a controlled brake check.
Parts and condition: Standard road pad specification; discs remain within service limits.
AED 1,450
Work: Diagnose coolant loss, replace an accessible leaking hose assembly, refill with suitable coolant, bleed the system and verify temperature behavior.
Parts and condition: No water-pump, radiator or internal engine damage assumed.
AED 2,650
Work: Engine oil and filters, selected inspection items, diagnostic scan, fluid-level checks and final road test where safe.
Parts and condition: Routine service parts only; mechanical repairs and additional fluids are excluded.
AED 5,900
Final cost depends on inspection, exact specification, parts availability and vehicle condition. The written estimate identifies the approved scope. No warranty or result is implied by these planning scenarios.
An Italian car repair quote should be specific enough to compare. It should identify the affected system, selected parts, labor, fluids, calibration or programming, testing and major exclusions. A low parts-only figure can become expensive when installation and required setup are added later.
Availability and choice vary by model. The quote should state the proposed part basis and whether related seals, fasteners, sensors or fluids are included. We do not imply that every part is held in stock.
Some batteries, modules, transmission components, steering work and driver-assistance repairs need coding, setup or calibration. This should be included when the repair requires it.
Relevant leak checks, fluid checks, stationary operation, diagnostic review and road testing help confirm the work. Testing is selected for the completed repair and the condition of the vehicle.
Our independent workshop supports Italian-car owners across Dubai and customers coming from Abu Dhabi, Sharjah and Ajman. Free workshop inspection and free pickup and delivery are available. A dedicated on-site inspection can also be arranged when appropriate, with any applicable visit fee confirmed separately.
Call or WhatsApp with the vehicle model, the service or symptom and your preferred workshop visit or pickup details. This is enough to start. Technical details can be requested later if required for diagnosis or parts matching.
A mobile van is available for dedicated on-site assessment, but not every repair can be completed at the vehicle location.
A good visit should solve the current concern and make the next maintenance decision clearer. After the agreed work, keep the invoice and note the fluids, filters and parts used. This helps avoid repeating recently completed work and gives the next technician a useful starting point. It is especially valuable for imported cars, vehicles with limited records and performance models that have received previous modifications.
Check for fresh drops, new smells or changing levels after cooling-system, engine or transmission work. A small visible change should be inspected before it becomes an overheating or lubrication problem.
Do not assume a warning is related to the last repair. Record the message and when it appeared. Early testing may separate a new battery, sensor or wiring issue from the system that was previously serviced.
Service intervals and fluid requirements vary by model, use and specification. We help identify the next sensible maintenance items without presenting every possible task as immediately required.
We handle repair and maintenance for Ferrari, Lamborghini, Maserati, Alfa Romeo, Fiat, Abarth and other supported Italian vehicles. Service depends on the model, fault and required parts. Share the model and concern to begin.
Yes. The inspection at our Al Quoz 4 workshop is free. A dedicated on-site inspection can be arranged separately, with availability and any applicable visit fee confirmed before dispatch.
Yes, free pickup and delivery are available. Tell us the location, vehicle condition and preferred timing. If the car is unsafe to drive, the team will discuss the suitable transport arrangement.
Yes. Several warnings may share a cause such as low voltage, wiring, network communication or one failed sensor. We scan the relevant systems and test the likely cause instead of treating every stored code as a separate failed part.
Routine maintenance may be completed faster than electrical diagnosis, parts ordering or major mechanical repair. The expected timing is provided after inspection because model, access, parts availability and repair depth all affect the schedule.
We can inspect the vehicle and explain the suitable next step. Previous modifications are considered when they affect diagnosis, software, cooling, exhaust, suspension or parts compatibility. Additional details may be requested when needed.
Stop driving if the car overheats, loses fluid, has low oil pressure, produces heavy smoke, makes severe mechanical noise or cannot move safely. For a stable warning without severe symptoms, call first and describe the behavior.
Call or WhatsApp +971 50 608 7150 with the model and a short description of the service or fault. Photos or a warning-light image can help, but they are not required to start the booking.
Arrange a free workshop inspection in Al Quoz 4 or discuss free pickup and delivery. We will inspect the concern, explain the available options and provide a written estimate before work begins.