Known damaged component
Send the installed part number, VIN and clear photos of the damaged area. For internal mechanical faults, review our Ferrari engine repair service.
Parts identification · sourcing and fitment
Ferrari spare parts and fitment in Dubai
Order Ferrari spare parts with fitment support in Al Quoz 4, Dubai. Tell us the model and the part or problem. We check the correct component, available sourcing options and the likely fitted cost. A free workshop inspection is available when the failed part is not yet confirmed.
01
When this page applies
Identify the Ferrari component you need
If the failed component is not confirmed, begin with the relevant diagnostic or repair page. Include the vehicle details and component evidence so the proposed part can be checked accurately.
Warning with no confirmed part
Book diagnosis first; a warning can have wiring, sensor, mechanical or supply causes.
Inspection and diagnosticsMaintenance component
Confirm the model, service task and required specification rather than using a generic filter or fluid.
Car serviceBody or trim part
Color, finish, side, model year and mounting details may need verification.
Ferrari body shopCustomer-supplied part
Suitability, condition and fitment responsibility must be agreed before booking.
Rare or superseded part
Availability and alternative paths should be checked before the vehicle is dismantled.
Inspection before work
Confirm the fault before ordering
A failed fuse, wiring issue, connector, fluid problem or related mechanical fault can produce symptoms that appear to point to a larger component. Diagnosis reduces the risk of purchasing an expensive but unnecessary part.
When a part number has been superseded, the replacement may require related hardware, coding, calibration or revised installation steps. Those requirements belong in the scope.
02
A defined scope
Choose the right Ferrari part source and condition
The estimate should identify the proposed component and what the price includes, rather than using “Ferrari parts” as a vague line item.
Request an itemized AED quotation covering the part, shipping where applicable, labor, consumables and any programming. Confirm the quoted availability, return conditions and whether VAT is included before approving the order.
New replacement
Confirm brand/source, specification, inclusions and availability for the VIN.
Remanufactured component
Clarify core return, included subcomponents, testing and supplier terms.
Used component
Check condition, provenance where available, compatibility and fitment risk.
Customer-supplied part
Agree inspection limits, fitment charges and responsibility if the part is incorrect or faulty.
Programming or calibration
Identify any electronic setup, security access or calibration needed after installation.
Related consumables
Seals, fluids, fasteners and one-time-use items should be named where required.
Need a part or only know the symptom?
Tell us what your Ferrari needs
Send the model and the part or problem. That is enough to start. We can request the VIN or installed part number later when accurate matching requires it.
Estimated parts prices in Dubai
Ferrari Spare Parts Price Guide
These market-based ranges help you plan before the exact reference and availability are checked. They are estimated part prices for common categories, not promises of stock or a final fitted total.
| Part or category | Estimated price | What the range covers | What can change it |
|---|---|---|---|
| Oil filter, each | AED 160–430 | One model-compatible filter before oil and installation | Engine, reference, source and quantity |
| Engine air filter, each | AED 70–360 | One filter before installation; some engines use two | Model, filter design and source |
| Cabin filter set | AED 300–750 | Model-matched cabin filtration parts before fitting | Filter type, quantity and access |
| Battery | AED 700–2,000 | Compatible premium battery before fitting or registration | Capacity, battery type and vehicle setup |
| Brake pad set per axle | AED 1,200–4,100 | One front or rear pad set; sensors may be separate | Model, brake package, source and sensors |
| Used body or lighting part | AED 1,500–14,000+ | One inspected used component before paint, fitting or coding | Part, condition, finish, freight and rarity |
Price note: Final cost depends on the Ferrari model, exact reference, new or used condition, quantity, supplier availability, freight, import charges, fitting, fluids, programming and VAT. The written quotation separates the part price from installation and related work so you can compare like for like.
Three fitted-part quotations
What a Ferrari Parts Quote Can Include
These are typical job estimates, not claims about completed customer vehicles. They show how a useful quotation combines the part, related items and fitment instead of presenting one unexplained price.
2019 Ferrari Portofino Battery Replacement
Customer request: The car cranks slowly after parking and the battery test confirms replacement is appropriate.
This estimate includes a compatible premium battery, safe removal and installation, terminal inspection, battery registration where required and a charging-system recheck. It does not assume that a battery will solve a charging or parasitic-drain fault.
- Estimated total
- AED 1,850
- Typical workshop time
- About 1–2 hours
The final amount changes with battery specification, access, coding requirements and test results.
2017 Ferrari 488 GTB Front Brake Pads
Customer request: The front pads are confirmed worn, while the discs and calipers remain suitable for continued use.
This estimate covers one model-compatible front pad set, wear sensors where required, fitting, brake-area cleaning and a controlled final check. Disc replacement, caliper work and brake-fluid service are excluded unless separately found and approved.
- Estimated total
- AED 4,250
- Typical workshop time
- About 3–5 hours
Carbon-ceramic brake condition, exact brake package, parts source and sensor requirements can change the quotation. Review the diagnostic and installation scope for Ferrari brake repair.
2013 Ferrari California Used Headlamp
Customer request: A damaged lamp assembly needs replacement and the owner wants a used-part option compared with new.
This estimate covers sourcing one matching used headlamp, checking its visible condition and reference, freight allowance, removal, installation and a basic function check. Paint work, control modules, wiring repairs and coding are separate when required.
- Estimated total
- AED 8,900
- Typical workshop time
- About 1 working day after arrival
Side, market specification, included modules, lens condition, shipping and programming can change the total.
Parts availability
Confirm availability, freight and installation requirements
Auto Repair UAE is an independent workshop. Availability, source and part type are confirmed for the individual inquiry; stock and delivery timing depend on the confirmed part.
Some security, software, calibration, composite or specialist operations may require an external or manufacturer-specific route. That limitation should be established before ordering.
04
Part identity
Use the VIN and installed part number to confirm fit
Ferrari part selection should connect the exact vehicle to the exact assembly and reason for replacement. Appearance, model name or a seller’s compatibility list is not enough.
| Evidence | Why it is needed | Risk it reduces |
|---|---|---|
| VIN, model year and market | Routes the catalog and specification search. | Wrong generation or regional fitment. |
| Installed part number and photos | Confirms supersession, connector, orientation and current hardware. | Ordering a visually similar but incompatible component. |
| Diagnostic finding | Shows why the part is proposed and whether another system caused the failure. | Replacing a reported component without proving it is faulty. |
| Modification and repair history | Identifies non-original calibration, wheels, exhaust, suspension or body work. | Applying factory assumptions to a changed car. |
| Required coding or calibration | Separates physical fitment from electronic completion. | Installing a part that cannot be commissioned. |
05
Commercial comparison
New, remanufactured, used and customer-supplied parts
A lower purchase price can be poor value if condition, fitment, programming, core return, customs delay or missing hardware is not included.
How the part condition affects the price
A new genuine or manufacturer-supplied component may offer the clearest provenance but can have availability and cost constraints. An OEM-equivalent item must still match the required specification. A used component needs mileage, damage, storage and donor identity where available. A remanufactured unit needs a description of the work performed, test result, core requirement and warranty terms.
For body, trim and interior items, color, grain, weave, finish and mounting points matter. For mechanical and electronic parts, tolerances, calibration, software and associated consumables can matter more than visible similarity.
What happens with customer-supplied parts
If the owner supplies a component, the workshop first confirms whether it can inspect and fit it. Labor, failed-fitment risk, warranty responsibility, missing hardware and diagnostic time should be agreed before the car is dismantled. Supplying a part does not prove the original diagnosis.
- Part price
- Exact component and source.
- Associated items
- Seals, fluids, fasteners, clamps or one-use hardware.
- Commissioning
- Coding, calibration, learning or alignment if required.
- Logistics
- Availability, customs, core return and storage timing.
- Verification
- Functional, leak, warning or road check after fitment.
06
Fitment planning
Ferrari installation and completion checks
Replacement work is complete only when the cause, installation requirements and post-fitment checks are addressed.
Before removal
Photograph routing, connectors, clips, fasteners, protective films and existing marks. Record fluid condition, fault data or measurements supporting the replacement. For low-clearance or delicate body areas, confirm lift and protection procedures before access begins.
If dismantling may expose additional damage, the estimate should contain a pause point. The owner reviews photographs and the revised scope before extra parts are ordered.
After installation
Use the correct fluids, torque information, bleeding, priming or calibration method for the confirmed vehicle. Clear a warning only after the related condition has been checked. Verification may include leak inspection, stationary function, scan status, alignment, temperature or a controlled road test when safe.
The handover identifies the fitted part, source, associated work and any restriction or follow-up.
07
Clear sourcing and fitment
How Ferrari part availability is confirmed
Auto Repair UAE is an independent workshop. Parts stock, software access and specialist procedures are checked individually. Manufacturer warranty and security functions may require an authorized Ferrari provider.
Identify
VIN, installed part, complaint and modification history.
Diagnose
Confirm why replacement is needed and whether another fault contributed.
Source
Check reference, availability, provenance, price and associated items.
Fit
Use a confirmed procedure and protect surrounding systems.
Verify
Document the result and any operation requiring another specialist route.
If the required part, calibration or procedure cannot be supported responsibly, the correct result is a documented referral or staged plan. That protects the vehicle better than dismantling first and researching later.
08
Before booking
Request a Ferrari part
Send the Ferrari model and the part or symptom. That is enough for the first message. If accurate matching needs more detail, we may then request the VIN, installed part number or a clear photo of the label. If you already have a seller quotation, send it so the included hardware, condition and return terms can be compared.
Do not drive
Stop for overheating, uncertain brakes or steering, tire damage, active fluid loss, smoke, a high-voltage warning or severe mechanical noise. Confirm low-clearance transport and wheel movement before recovery.
Check the match before installation
Let the workshop compare the vehicle, diagnosis and supplied component first. A physically similar Ferrari part can still differ in revision, calibration, finish or installed hardware.
Before booking
Ferrari spare-parts questions
Do you keep every Ferrari part in stock?
No. The part is identified for the VIN and availability and lead time are checked before approval.
Can I order a part from a dashboard warning?
Diagnosis is recommended first because warnings can have several causes and may not prove the named component has failed.
Can you fit a part I bought elsewhere?
Ask before booking. Compatibility, condition, fitment charges and responsibility for a faulty or incorrect supplied part must be agreed.
Do you guarantee genuine Ferrari parts?
No blanket claim is made. The proposed source, specification and part type are stated for the individual repair.
What information is needed for a quote?
Send VIN, model, year, part number/photos and the diagnostic or damage evidence that led to the request.
Is an inspection available before I order a part?
Yes. Free inspection is available when the vehicle concern needs assessing. Send any existing findings and component details so the appropriate checks can be discussed before ordering.
Do you offer mobile checks and vehicle collection?
Our service van can be requested for a remote car checkup. Free pickup and delivery are available by arrangement. The vehicle’s clearance, condition, parts availability and fitting appointment guide the arrangement.
Book with useful details
Request a component and fitment quotation
Send the Ferrari model and the part or problem, then say whether you need sourcing, fitting or an inspection. Add your location if you prefer an on-site assessment or free pickup and delivery.