VIN and vehicle details
Send the 17-character VIN, model, year, engine, and GCC or imported specification if known. A registration-card photo can help, but sensitive personal details can be covered.
Cadillac parts support in Al Quoz 4
Cadillac Spare Parts Dubai
Source the correct Cadillac part with VIN-based fitment. Compare genuine and alternative choices, availability, warranty, and installed cost before you approve the order.
Identify before ordering
What we need to find the correct Cadillac part
A part name alone is often not enough. Cadillac vehicles can use different revisions, connectors, brake packages, cooling layouts, suspension options, and control modules within the same model year. We verify the vehicle and the failed component before confirming a match.
Fault and diagnosis
Tell us what the vehicle is doing and which tests have been completed. Replacing a named part without confirming the cause can add cost while leaving the original fault unchanged.
Old part information
Clear photos of labels, casting numbers, connectors, mounting points, and the complete component help confirm identity. Superseded numbers must be checked, not assumed.
Required quality level
State whether you prefer genuine Cadillac, a named OEM-equivalent manufacturer, a reputable aftermarket option, or a tested used assembly where appropriate.
Supply or fitted price
A parts-only quote is different from a complete installed repair. Fitting can require seals, fluids, bolts, coding, calibration, alignment, or related items.
Timing and availability
Dubai stock, UAE stock, regional orders, and international orders have different lead times. We state the expected route before taking approval.
VIN
Do not order from appearance alone
Two parts may look identical but use different software, internal specifications, sensors, connectors, or mounting geometry. The VIN, original part number, and technical catalog data reduce avoidable returns and repeat labor.
Parts across the vehicle
Cadillac spare parts we can source
Availability changes by model, production date, and part status. We source routine service items as well as larger repair components, then confirm what is included in the box and what must be ordered separately.
Engine and fuel
Mounts, gaskets, sensors, ignition coils, spark plugs, injectors, fuel pumps, timing components, intake parts, oil-system parts, and suitable internal components after diagnosis.
Cooling and air conditioning
Radiators, water pumps, thermostats, hoses, reservoirs, fans, compressors, condensers, evaporator-related parts, valves, seals, and pressure sensors.
Brakes and suspension
Pads, discs, calipers, sensors, arms, bushes, links, ball joints, bearings, shock absorbers, struts, air-suspension parts, and steering components.
Electrical and electronics
Batteries, alternators, starters, switches, lamps, cameras, parking sensors, control modules, wiring items, and infotainment components where compatible.
Transmission and driveline
Mounts, seals, filters, service kits, coolers, driveshaft components, CV parts, differentials, transfer-case items, and suitable assemblies.
Body and interior
Bumpers, grilles, mirrors, handles, lamps, trims, clips, undertrays, glass-related parts, seat switches, cabin controls, mats, and selected accessories.
Consumables and one-time-use hardware matter. A main component may also need seals, gaskets, clips, stretch bolts, fluid, refrigerant, programming access, or calibration. The quote separates these supporting items so the final repair is not presented as only the price of the largest part.
Useful buying ranges
Cadillac spare parts prices in Dubai
These rounded estimates show common parts-only ranges. Final price depends on the VIN, manufacturer, genuine or alternative specification, stock source, revision, condition, and whether additional hardware is required.
| Part category | Estimated parts price | Typical contents | Main variables |
|---|---|---|---|
| Oil and filter service parts | AED 300 to 850 | Suitable oil filter, oil, drain seal, and inspection consumables | Engine, oil specification, capacity, and filter brand |
| Air and cabin filter set | AED 250 to 750 | Engine air and cabin filtration items where applicable | Model, filter count, carbon media, and brand |
| Front brake pads | AED 450 to 1,500 | Axle pad set and sensor when supplied with the kit | Brake package, V-Series equipment, brand, and sensor |
| Front brake discs and pads | AED 1,800 to 5,500 | Matched front discs, pads, and relevant sensor or hardware | Disc diameter, performance package, and manufacturer |
| Battery | AED 650 to 1,800 | Correct capacity and technology for the vehicle | AGM specification, size, registration, and warranty |
| Engine mount set | AED 1,200 to 4,000 | Required mount or matched set according to inspection | Engine, mount type, quantity, and genuine or alternative choice |
| Cooling-system component | AED 500 to 3,500 | Thermostat, water pump, radiator, fan, or related part | Part selected, engine, integrated electronics, and seals |
| Suspension component | AED 450 to 6,500+ | Arm, bush, bearing, shock, strut, compressor, or air spring | Steel or air suspension, side, quantity, and brand |
| Headlamp assembly | AED 2,500 to 12,000+ | Correct lamp assembly as identified | LED technology, adaptive function, modules, and condition |
| Control module | AED 1,500 to 8,000+ | Compatible new, remanufactured, or used unit where suitable | Part number, programming, immobilizer status, and source |
AED
Ask for a complete installed comparison
A low part price may exclude VAT, freight, seals, fluids, coding, calibration, and labor. We can quote the part alone or the full workshop repair. Our complete repair can be 65% to 70% lower than agency pricing when part quality and work scope are genuinely equivalent.
Diagnosis protects the purchase
Part identification and failure confirmation
A scan result, warning light, or workshop opinion can point toward a system without proving that one component has failed. We use fault codes as a starting point and combine them with inspection, measurements, service information, and circuit or mechanical tests where appropriate.
For visible body and trim items, matching still involves more than shape. Paint code, side, camera or sensor openings, wheelbase, trim level, build date, and mounting hardware can change the part. Electronic modules may also require programming, security matching, or adaptation after installation.
- VIN and production date
- Original and superseded part numbers
- Engine, transmission, and drivetrain
- Option codes and brake or suspension package
- Connector, mounting, and sensor details
- New, remanufactured, or used condition
- Programming or calibration needs
- Return and warranty conditions
Compare like with like
Genuine, OEM-equivalent, aftermarket, and used parts
The right choice depends on the component, vehicle age, safety role, expected ownership period, availability, and total installed cost. We name the proposed route rather than using vague labels.
Genuine Cadillac
Supplied in the vehicle manufacturer channel with the applicable Cadillac or GM part number. This route is useful when calibration, design detail, warranty requirements, or exact originality matters.
Named OEM-equivalent
A part from a recognized manufacturer that meets the required specification for the application. Brand, country of origin, warranty, and compatibility are stated before approval.
Aftermarket, remanufactured, or used
These can control cost or solve availability, but quality varies. We disclose the maker or source, condition, testing, warranty, and any installation limitations.
We do not describe every non-dealer item as OEM. A used body panel is not the same purchase as a new genuine panel, and a remanufactured electronic unit is not the same as a sealed new module. Clear naming makes price, condition, and warranty comparisons meaningful.
Plan the whole repair
Small supporting parts can decide the result
A replacement component may depend on related hardware and procedures. The estimate should show these requirements before the vehicle is dismantled.
Seals, fluids, bolts, and clips
Gaskets, O-rings, coolant, transmission fluid, brake fluid, refrigerant, single-use bolts, retainers, and clips may be required for a clean installation. Reusing damaged or one-time-use items can create leaks, noise, movement, or repeat labor.
Part kits vary by supplier. We check the box contents and list missing supporting items separately instead of assuming that every seal or fastener is included.
Coding, setup, and final checks
Batteries, cameras, modules, lamps, steering parts, suspension sensors, and other components may need registration, programming, calibration, initialization, or a road test. Mechanical fit alone does not complete an electronic repair.
When another fault has damaged the original part, that cause must be corrected too. A new alternator fitted with a failed battery, or a new compressor installed in a contaminated system, can fail again.
Three useful cost scenarios
Typical Cadillac parts and fitment jobs
These are estimated service scenarios, not completed customer-work claims. They show how part choice, related items, programming, and labor change the complete cost.
2020 Cadillac XT5
Front brake pad replacement using a named quality set, including wear-sensor check, hardware review, fitting, brake inspection, and road test. Discs remain serviceable after measurement.
AED 1,250 estimated total
2018 Cadillac Escalade
AGM battery replacement matched to capacity and fitment, including electrical-system check, battery fitting, terminal preparation, registration or reset where required, and charging review.
AED 1,450 estimated total
2019 Cadillac CTS
One engine mount and supporting fasteners after vibration diagnosis, including correct part sourcing, removal, installation, neighboring mount inspection, and final idle and road check.
AED 2,850 estimated total
Brake-package changes, imported specifications, unavailable stock, seized hardware, additional damaged components, and required programming can alter these totals. We obtain approval before adding work.
Parts for current and earlier vehicles
Cadillac models and specifications we support
We source parts for GCC and many imported Cadillac vehicles, subject to catalog coverage and availability. Correct identification matters especially when a US-market vehicle has equipment that differs from a locally supplied version.
- Escalade and ESVEngine, cooling, suspension, brakes, electronics, body, lighting, interior, and service parts.
- XT4, XT5, and XT6Service kits, driveline items, sensors, cooling, brakes, suspension, lamps, and trims.
- CT4 and CT5Powertrain, V-Series brake and suspension options, electronics, body, and maintenance parts.
- CTS, ATS, XTS, and SRXNew, alternative, remanufactured, or used routes depending on part status and condition.
Discontinued parts may require a superseded number, specialist supplier, suitable tested used part, or repair of the original assembly. We explain the limitation and likely lead time before the vehicle is dismantled.
A controlled ordering process
From VIN check to fitted Cadillac part
Send the VIN, model, required part, symptom, and any available photos. We confirm what can be priced remotely and when an inspection is needed.
Identify the vehicle
We check the VIN, model year, engine, specification, build date, and relevant option information.
Confirm the failed component
Existing diagnosis is reviewed or the vehicle is inspected so the order addresses the actual problem.
Compare supply routes
Suitable genuine, named alternative, remanufactured, or used choices are compared with price, condition, warranty, and lead time.
Approve, fit, and verify
The approved part is ordered, installed with required supporting items, coded or calibrated where needed, and checked before handover.
Special-order and electronic parts may be non-returnable once ordered, opened, coded, or installed. We explain known return restrictions before taking approval. Delivery dates are estimates until the supplier confirms dispatch and the item reaches the workshop.
Cadillac parts shop near me
Parts support from Al Quoz 4, Dubai
Our Al Quoz 4 workshop supports Cadillac owners across Dubai with identification, sourcing, installation, and final checks. Free pickup and delivery is available for workshop repairs. A dedicated on-site inspection can be arranged when it is useful, although dismantling, advanced diagnosis, coding, and calibration generally need workshop equipment.
For the fastest useful reply, send the VIN, model year, required part or symptom, photos, and whether you want supply only or installation. If the vehicle cannot be driven safely, tell us so we can discuss pickup rather than asking you to bring it.
Common questions
Cadillac spare parts FAQs
Do you sell genuine Cadillac parts?
Yes. Genuine parts can be quoted when available. We can also compare named OEM-equivalent, aftermarket, remanufactured, or used choices when appropriate and clearly identify the proposed route.
Can you check a part using my VIN?
Yes. Send the complete 17-character VIN and the required part or symptom. Some items also need the original number, option code, connector photo, or physical inspection.
Do you supply parts without fitting them?
Many parts can be supplied without installation. Return and warranty conditions may differ for parts-only purchases, especially for electrical, coded, opened, special-order, or incorrectly diagnosed items.
Can I bring my own Cadillac part for fitting?
We can review customer-supplied parts before accepting the job. Fitment, condition, completeness, and warranty responsibility must be clear. Additional labor caused by an incorrect or defective supplied part is separate.
How long does a special-order part take?
Timing depends on Dubai or UAE stock, the regional warehouse, international dispatch, customs, and supplier processing. We provide an expected range, but it is not guaranteed until the part arrives.
Are used Cadillac parts available?
Used parts may be considered for selected body, trim, mechanical, or electronic items when new stock is unavailable or uneconomical. Part number, condition, testing, programming limitations, and warranty must be checked.
Will a control module work immediately after installation?
Not always. Many modules require programming, security matching, coding, configuration, calibration, or adaptation. Some used modules cannot be transferred without specialist procedures.
Is the initial workshop inspection free?
Yes, the initial workshop inspection is free. If dismantling, advanced electrical testing, pressure testing, or another paid diagnostic procedure is required, we explain it before starting.
Cadillac parts in Dubai
Send the VIN for a checked parts quote
Tell us the required part or vehicle symptom and whether you need supply only or installation. We will confirm the matching route, availability, price, and next step. Battery specification, fitting, and electrical verification are covered on the Cadillac battery replacement page.