Panel repair and paint assessment · Al Quoz 4
Need a door ding or damaged panel repaired? We check the dent, paint, access and nearby parts before recommending paintless repair, panel reshaping and paint, or replacement. A small accessible ding with intact paint is estimated at AED 285–570 before 5% VAT. The initial workshop inspection is free.
Free workshop inspection and free pickup and delivery are available. Dedicated on-site inspection terms are confirmed before dispatch.
Start with the damage you can see
A dent is not defined only by its diameter. Its depth, location, metal tension, paint condition, panel material, previous repair history, and access behind the panel determine the appropriate method. The first inspection separates simple appearance damage from problems involving mounts, trim, sensors, or panel alignment.
Shallow dents on an open section of a door, fender, hood, or quarter panel may be suitable for paintless correction when the coating remains intact. Dents beside a reinforcement, folded edge, handle, or trim strip need an access check before the method is confirmed.
A sharp crease concentrates tension through the metal. Damage across a styling line is harder to restore than a soft round dent because the original contour must be rebuilt without leaving waves or a flat reflection. Cracked paint usually changes the job to panel and paint repair.
Broad deformation can stretch metal, move brackets, disturb door or trunk alignment, or damage parts behind the outer skin. If a lamp, camera, parking sensor, wheel opening, hinge, latch, or structural area is involved, the inspection extends beyond cosmetic repair.
Choose the least invasive suitable method
The correct choice should restore shape, finish, fit, and safe clearance. It should not hide stretched metal under excessive filler or repaint a suitable factory finish without a reason.
PDR gradually reshapes suitable metal without repainting when the paint is intact and the dent is accessible. It can retain the original finish for a minor ding. Our paintless dent removal page covers detailed suitability, methods and PDR prices.
Best suited to: many door dings and shallow parking dents; sharp body-line creases need individual assessment.
The panel is reshaped, prepared, primed, color matched, refinished, and polished as required. This route suits cracked paint, deeper creases, exposed metal, sharp impacts, and damage that cannot be restored cleanly with PDR. Blending is quoted only where the final color match requires it.
Best suited to: paint damage, stretched areas, difficult edges, and repaired panels needing refinishing.
Replacement can be more practical when a panel is torn, badly stretched, corroded, repeatedly repaired, or unable to hold the correct shape and mounting. The quote should identify whether the part is genuine, OEM-equivalent, aftermarket, or used, plus fitting and paint work.
Best suited to: severe deformation, torn mounting points, unsafe repairs, and uneconomical restoration.
Estimated prices by repair choice
These indicative ranges are before VAT for the work described in each row. 5% VAT is not included in the displayed prices. The alternatives are not added together for one dent. Shape, paint condition, panel material, access, earlier repairs, parts and nearby sensors change the final cost. We inspect the vehicle and confirm a written payable total before any paid repair.
| Repair choice | Estimate before VAT | When it applies and what is covered |
|---|---|---|
| Paintless repair of one small ding | AED 285–570 | Shallow, accessible ding with intact paint; controlled reshaping and a reflection check. |
| Dent repair and repaint, per panel | AED 665–2,095 | Repairable panel with cracked paint or exposed metal; reshaping, preparation and refinishing. Blending is quoted separately where needed. |
| Plastic bumper reshape and refinish | AED 620–1,715 | Repairable plastic with sound mounts; reshaping, preparation, paint and fitting checks. |
| Panel replacement and paint | AED 1,430–5,240+ | Compatible part, removal, fitting, preparation, paint and gap review. The quote states part condition and adjacent work. |
For a body-line crease: If the paint is intact and the metal can be restored, PDR may be suitable. A cracked finish usually needs panel reshaping and paint; the per-panel row above is the relevant starting budget. The written quote identifies the method, parts, materials, paint area, extra work and VAT-inclusive total.
A better first assessment
Start with one photo showing the complete side or end of the vehicle. Add a straight close view and an angled view where light reflects across the damage. The reflection helps show the low area, raised crown, crease direction, and any distortion around a body line.
Mention cracked paint, exposed metal, earlier filler, wrapping, ceramic coating, or a door, hood, or trunk that no longer opens normally. Also mention a warning light, damaged lamp, parking sensor issue, wheel contact, or fluid leak after the impact. Photos guide the first conversation, but they cannot confirm hidden damage or final price.
More than the visible low spot
The outer mark may be only one part of the damage. We follow the impact area through the panel, mounting points, trim, openings, and nearby equipment so the estimate reflects the complete repair.
We review dent width, depth, crowns, creases, stretched areas, edge involvement, and the quality of the surrounding reflection.
Cracks, chips, exposed metal, corrosion, old filler, repainting, coating, and color mismatch can change the repair route and expected finish.
Door beams, braces, bonded sections, insulation, trim, double skins, aluminum construction, and restricted rear access affect labor and method.
We check gaps, seals, hinges, latches, handles, lamps, cameras, parking sensors, wiring, liners, and wheel clearance where the impact makes them relevant.
From assessment to handover
The process stays simple for the customer while the workshop separates cosmetic work, dismantling, parts, paint, and final checks.
Send the vehicle model and dent location, or book the free workshop inspection. Photos are useful but optional.
We check shape, paint, material, access, previous repairs, alignment, mounts, and nearby equipment.
You receive the suitable PDR, panel repair, bumper repair, or replacement route with its expected finish explained.
The estimate identifies labor, parts, preparation, paint, blending, dismantling, outside services, exclusions and the VAT-inclusive payable total.
The panel is repaired or replaced, refinished where needed, and reassembled with affected trim and equipment.
We review panel shape, reflection, color, texture, gaps, operation, mounting, cleanliness, and any relevant sensor function.
Typical complete-job budgets
These example totals exclude 5% VAT for the named work and show how different methods affect the budget. They are planning examples, not completed customer jobs or guaranteed quotes. Inspection, access, paint condition, panel material, parts and hidden damage can change the total.
Typical job estimate
A shallow front-door parking ding with intact factory paint. The estimate covers access preparation, controlled paintless reshaping, reflection checks, and final cleaning.
Estimated total: AED 430
Typical job estimate
A creased rear-quarter dent with a paint crack. The estimate covers panel reshaping, limited filler where required, preparation, paint materials, refinishing, and polishing.
Estimated total: AED 1,760
Typical job estimate
A deformed plastic bumper corner with scuffing and secure reusable mounts. The estimate covers reshaping, surface preparation, color matching, refinishing, refitting, and parking-sensor checks.
Estimated total: AED 1,190
When the damage is not only cosmetic
A small door ding that does not affect openings, lights, wheels, glass, steering, braking, temperature, or warning systems may be suitable for a planned workshop visit. Keep sharp edges away from people and protect exposed metal from moisture until the repair.
Do not drive when a wheel or tire touches damaged bodywork, a panel may detach, a door or hood cannot latch, glass blocks vision, fluid is leaking, lights are broken, steering or braking changed, or a red warning tells you to stop. Call first so pickup or recovery can be discussed. If the impact may have damaged structural, mechanical or electronic parts, see the collision repair service.
Cars, SUVs, pickups, and vans
Door skins, fenders, hoods, roofs, quarter panels, tailgates, pickup bedsides, and bumpers do not respond the same way. Vehicle design determines material, access, reinforcement, trim removal, and whether sensors or powered parts are close to the repair.
Conventional steel can often be reshaped through PDR or panel repair, depending on stretch and paint condition. Strong body lines and folded edges increase the time needed to restore an even contour.
Aluminum behaves differently from steel and work-hardens as it moves. It needs suitable tools, controlled heat where permitted, and contamination control. Not every aluminum dent is suitable for a paint-free repair.
Bumper covers and some exterior panels may be reshaped when the material and mounts remain serviceable. Tears, failed tabs, deep gouges, previous repairs, and loss of shape can make replacement the better choice.
We repair dents on common European, Japanese, American, Korean, Chinese, and luxury vehicles. The make and model are enough to begin. A VIN may be requested later only when a replacement part or exact equipment specification must be matched.
Judge the completed result
A finished repair should be reviewed in useful lighting and from more than one angle. The panel should follow the intended body shape without an obvious low area, raised crown, sanding edge, heavy filler contour, or distorted reflection. Refinished areas should have a suitable color, gloss, texture, and transition to nearby panels.
Doors, hoods, trunk lids, and tailgates should open, close, latch, and seal normally. Bumpers, moldings, handles, lamps, liners, and other removed parts should be secure. Where an impact or dismantling affected sensors, cameras, wiring, or powered equipment, the applicable function checks should be included in the repair record.
Keep the written estimate and invoice. They should identify the panel, approved method, parts condition, paint area, outside services, and any job-specific warranty terms that were actually provided. Report a related concern promptly with the invoice reference and clear photos.
Workshop, pickup, or on-site assessment
The initial workshop inspection is free. Free pickup and delivery are available across Dubai when bringing the car is inconvenient. Tell us whether the vehicle starts, moves, steers, and maintains safe tire clearance so collection can be planned correctly.
A dedicated inspection van can assess suitable damage at the vehicle location. Site access, inspection limits, and any separate visit terms are confirmed before dispatch. Detailed dismantling, panel work, refinishing, curing, and final lighting checks normally require workshop equipment.
Direct booking answers
These answers cover the main repair and booking decisions. An inspection confirms the method and written price for your vehicle.
One small eligible ding is estimated at AED 285–570 with paintless repair. A repairable panel that needs reshaping and repainting is AED 665–2,095; a plastic bumper repair and refinish is AED 620–1,715; panel replacement and paint is AED 1,430–5,240+. These indicative ranges exclude 5% VAT for the named work. We confirm your vehicle’s final payable total before repair.
No. PDR requires suitable paint, metal condition, dent shape, and access. Cracked paint, exposed metal, sharp stretching, torn edges, heavy previous filler, or severe deformation can require conventional repair and refinishing.
Some eligible minor dents may be completed the same day, subject to inspection and capacity. Larger repairs need time for dismantling, shaping, preparation, paint, curing, reassembly, and final checks. The workshop gives an estimated completion time after assessing the damage.
Not always. PDR does not repaint the panel. For refinishing, blending depends on the color, paint condition, repair position, adjoining panels, and expected match. The written estimate should state the paint area rather than adding blending without explanation.
Selected aluminum dents can be repaired, including some suitable PDR cases. Aluminum moves and work-hardens differently from steel, so the panel, coating, access, and manufacturer repair limitations must be considered before the method is promised.
Yes. Free pickup and delivery are available across Dubai. Explain the vehicle condition and whether any wheel, tire, opening, glass, warning, steering, or braking issue followed the impact so safe transport can be arranged.
Send the vehicle make, model, year, damaged panel, one wide photo, and clear angled close views. Your preferred visit or pickup details are enough to begin. An inspection may still be necessary to confirm hidden damage, access, and final price.
Arrange an inspection when paint is cracked, metal is exposed, a sharp edge is present, or the dent affects an opening, seal, lamp, sensor, or wheel area. Even a cosmetic dent is easier to plan when previous damage and corrosion have not expanded.
Restore the panel with the right method
Tell us the vehicle and damaged panel. We will inspect the dent, compare suitable repair choices, and provide a written estimate before approved work begins.