Chevrolet spare parts Dubai · Supply and fitting
Chevrolet spare parts in Dubai
Source the correct Chevrolet part with a clear choice of genuine, OEM-equivalent, aftermarket, new, or refurbished options when suitable. We verify fitment, state the part condition, and can install and test it at our Al Quoz 4 workshop.
Parts for routine and major repairs
Chevrolet parts we can source
Availability changes by model, year, market specification, and supplier stock. We can check common service items and less frequent mechanical, electrical, body, cooling, AC, steering, suspension, braking, and interior components.
Engine and cooling
Gaskets, seals, mounts, sensors, pumps, thermostats, radiators, hoses, ignition parts, fuel components, timing parts, cylinder-head items, and selected internal assemblies.
Transmission and drivetrain
Service filters, seals, mounts, sensors, solenoids, valve-body components, axle parts, CV joints, bearings, driveshaft items, and selected replacement assemblies.
Brakes, steering, and suspension
Pads, discs, sensors, caliper parts, hoses, pumps, racks, tie rods, control arms, bushes, bearings, shocks, struts, springs, and related hardware.
Electrical and lighting
Batteries, alternators, starters, switches, modules, relays, wiring items, lamps, sensors, cameras, and control components subject to coding and compatibility.
AC and cabin parts
Compressors, condensers, evaporators, blower parts, valves, sensors, filters, vents, switches, trim, seat components, handles, and selected upholstery items.
Body and exterior
Bumpers, grilles, mirrors, glass, lamps, badges, panels, clips, seals, undertrays, liners, handles, and selected new or used body parts when condition is acceptable.
If the exact item is not immediately available, we explain the closest safe options rather than treating every part as interchangeable. A part that looks similar may have a different connector, calibration, rating, mounting point, software level, or market specification.
We also check the supporting items that make the main part usable. A pump may need seals and fluid, a suspension arm may need hardware and alignment, a body panel may need clips and paint, and an electronic unit may need programming. Including these requirements early gives you a more realistic completed price and avoids receiving a part that cannot be installed as quoted.
Compare condition, origin, and total cost
Genuine, OEM-equivalent, aftermarket, or refurbished
The lowest unit price may not be the lowest completed cost. Fit, service life, programming, installation time, related hardware, and return conditions all matter.
| Part route | Best suited to | What to verify | Main tradeoff |
|---|---|---|---|
| Genuine Chevrolet | Customers prioritizing original-brand supply and exact catalog matching | Part number, supersession, included hardware, stock, and installation requirements | Usually the highest purchase price and may require ordering |
| OEM-equivalent | Components made to a recognized original-equipment specification without Chevrolet packaging | Manufacturer identity, exact application, specification, and included accessories | Not every component has a clear equivalent source |
| Quality aftermarket | Common service and repair items where a suitable alternative is available | Brand, rating, material, fitment, intended use, and complete installed scope | Quality varies widely between brands and product lines |
| Used or refurbished | Selected major assemblies, modules, body parts, wheels, or unavailable items when condition can be checked | Condition, donor specification, testing, coding, wear items, and return terms | History and remaining service life may be less certain |
Your estimate identifies the proposed brand and condition before approval. We do not describe a used assembly as new, present an aftermarket part as genuine, or assume that a cheaper component has the same inclusions.
Parts and installed-price guidance
Estimated Chevrolet spare parts prices
These market-based estimates include 5% VAT for the stated scope. They are broad because model, year, brand, condition, supplier stock, labor access, fluids, programming, and related damaged items can change the total.
| Part or service | Estimated part price | Estimated installed total | Scope note |
|---|---|---|---|
| Engine oil filter | AED 42–158 | AED 315–735 | Installed total assumes a suitable oil-service package; oil grade and capacity vary |
| Brake pad set | AED 263–945 | AED 630–1,680 | Per axle with fitting and checks; discs, sensors, or caliper work are separate |
| Wheel bearing or hub | AED 420–1,575 | AED 840–2,415 | Per wheel position; fasteners, sensor issues, and difficult removal can affect labor |
| Shock absorber or strut | AED 420–1,890 | AED 945–3,150 | Per unit; paired replacement, mounts, alignment, or air suspension changes the total |
| Alternator | AED 735–2,625 | AED 1,260–3,675 | Condition and amperage stated; battery or wiring repair is additional |
| AC compressor | AED 945–3,675 | AED 1,890–5,250 | System flushing, refrigerant, condenser, valve, and contamination scope vary |
| Steering rack | AED 1,575–5,775 | AED 2,625–7,875 | New or refurbished condition stated; programming, fluid, and alignment depend on model |
| Replacement engine assembly | AED 8,400–26,250+ | AED 12,600–31,500+ | Engine identity, condition, accessories, seals, fluids, coding, and installation vary widely |
Check the exact part before ordering
Send the Chevrolet model, year, the part or symptom, and a photo of the old item or label when safely available. We will confirm what else is needed for a useful quote.
Our workshop price can be 65% to 70% lower than agency pricing when the same part specification and work scope are compared. A part-only price, an installed total, and a diagnostic repair are different purchases, so the written estimate separates them.
Avoid an expensive mismatch
How we match the correct Chevrolet part
We start with the model, year, and required part or symptom. When catalog fitment is not enough, we use the VIN, engine or transmission code, fitted part number, connector, dimensions, market specification, option equipment, and software requirements. These details are requested only when they help resolve a real compatibility question.
Superseded part numbers need careful handling. A later number may replace an earlier item but require updated hardware, a pair, a revised hose, a bracket, coding, or a service instruction. The quote should cover those related requirements instead of leaving an incomplete part at the workshop.
For modules, cameras, sensors, electronic steering, transmission controls, and other programmed components, physical fit does not prove functional compatibility. We check whether coding, calibration, adaptation, immobilizer matching, or online programming is likely to apply.
Three realistic supply-and-fit budgets
Chevrolet parts jobs and estimated totals
These are typical job estimates rather than completed customer records. They show how vehicle specification, part condition, related work, and installation affect the final amount.
Typical job estimate
2019 Chevrolet Malibu
Work: Diagnose front wheel-bearing noise, supply a matched new hub assembly, install with required fasteners, check the sensor signal, and road-test.
Part condition: New quality replacement hub matched to the fitted specification.
Estimated total: AED 1,350
Knuckle damage, ABS wiring, or a second bearing would be priced separately.
Typical job estimate
2017 Chevrolet Tahoe
Work: Supply and install a refurbished alternator after charging-system confirmation, inspect cables and battery condition, clear low-voltage faults, and retest output.
Part condition: Refurbished alternator with specification stated in the estimate.
Estimated total: AED 2,250
A failed battery, cable repair, or different amperage unit changes the total.
Typical job estimate
2020 Chevrolet Traverse
Work: Supply and fit front brake pads and discs, clean mounting surfaces, inspect calipers, renew specified hardware, and complete final brake checks.
Part condition: New OEM-equivalent pads and discs for the confirmed axle specification.
Estimated total: AED 2,800
Caliper repair, hoses, brake fluid, or rear-axle work is additional.
From request to tested fitment
How Chevrolet parts ordering works
-
01
Tell us what you need
Start with the model, year, part name, or vehicle symptom. A clear photo can help when the component is safely visible.
-
02
Confirm the specification
We identify the fitted variant and request the VIN or part number only when catalog or physical matching requires it.
-
03
Compare suitable choices
Available genuine, OEM-equivalent, aftermarket, used, or refurbished routes are separated by brand, condition, price, and scope.
-
04
Approve price and timing
The estimate states VAT, delivery timing, deposit or ordering conditions when applicable, installation, programming, and exclusions.
-
05
Fit and test
When installation is included, the part is fitted, connected, filled, adjusted, coded, or tested as appropriate before handover.
Chevrolet model coverage
Parts for Chevrolet cars, SUVs, and pickups
We can check parts for Spark, Aveo, Cruze, Malibu, Captiva, Groove, Equinox, Traverse, Trailblazer, Tahoe, Suburban, Silverado, Colorado, Camaro, Corvette, and other models. Availability is confirmed for the exact vehicle rather than promised from the model name alone.
- Passenger cars Service, cooling, ignition, suspension, brake, AC, body, and electrical parts vary by generation and engine.
- SUVs Two-wheel-drive and four-wheel-drive variants can use different hubs, suspension, drivetrain, cooling, and electronic components.
- Pickups Cab, bed, payload, drivetrain, towing package, engine, and market specification affect many parts.
- Performance models Brakes, cooling, wheels, suspension, engine, and drivetrain components may be unique to the trim or option package.
- Older or imported vehicles Supplier choice may include new old stock, quality alternatives, used components, or refurbishment after condition review.
Dedicated on-site inspections can be arranged for suitable assessment needs, while installation, programming, fluid work, and controlled testing are normally completed at the workshop. Free pickup and delivery is available across Dubai.
Read the complete total
Part price versus installed price
A part-only quote covers the item described and any explicitly listed hardware. An installed quote should also state labor, seals, fasteners, fluids, consumables, programming, calibration, alignment, testing, disposal, and VAT where applicable.
Some faults damage more than one component. A failed compressor can contaminate an AC system, a leaking shock can affect mounts or a paired replacement decision, and a worn bearing can involve a hub, sensor, or damaged mounting surface. Inspection connects the purchased part to the repair that will actually solve the problem.
Return and ordering conditions matter for special-order electrical parts, painted body items, coded modules, and imported assemblies. We explain applicable conditions before the order is placed and do not present unconfirmed stock as immediately available.
If diagnosis has not identified the cause, we do not recommend ordering several possible parts as a substitute for testing. A free workshop inspection can establish the first check, while any advanced diagnosis is explained before approval. This matters for warning lights, intermittent electrical faults, overheating, transmission behavior, and steering concerns where several components can create the same symptom.
Choose stock, order, or refurbishment with clear timing
How availability changes the Chevrolet parts decision
Stock status is confirmed for the exact specification. A supplier listing can be outdated, reserved, located outside Dubai, or missing the hardware needed for installation. We separate items ready for collection from parts that require transfer, import, preparation, painting, coding, or refurbishment.
Immediately available items
Common filters, brake components, sensors, belts, batteries, bulbs, and service hardware may be available quickly, but the fitted variant still needs confirmation. We reserve the correct item after approval and plan installation around workshop capacity. Same-day work can be possible for suitable jobs, subject to stock, diagnosis, and an arranged slot.
Special-order components
Body panels, modules, trim, engine internals, market-specific lamps, transmission items, and unusual assemblies may need supplier ordering. The quote should state expected timing, deposit or cancellation conditions when applicable, freight, VAT, and whether the order can be returned after the part is linked, painted, coded, or opened.
Used or refurbished choices
A used or refurbished part can reduce cost or solve an availability problem, but it must be judged by condition and compatibility. We identify mileage or history only when genuinely known, explain visible wear, check the part reference, and state required service items, programming, core return, or testing in the estimate.
For an immobilized vehicle, free pickup and delivery can bring the car to the Al Quoz 4 workshop so the fitted part and surrounding system can be checked. A dedicated on-site inspection may help with selected initial assessments, while complex installation, programming, fluid work, and controlled testing are completed at the workshop.
Questions before ordering
Chevrolet spare parts FAQs
Do you sell genuine Chevrolet parts?
We can check genuine Chevrolet availability alongside suitable OEM-equivalent, aftermarket, used, or refurbished choices. The quote identifies the proposed brand and condition before approval.
Can you install the part as well?
Yes, installation can be included when appropriate. The estimate separates part cost from labor, fluids, programming, calibration, testing, and other related work so you can see the completed scope.
How do you confirm the correct part?
We use the model, year, fitted specification, part number, and catalog information. A VIN, engine code, connector photo, or old-part label may be requested later when it resolves a compatibility question.
Are all parts in stock?
No. Stock changes and some parts require ordering. We confirm availability, source, expected timing, and applicable order conditions before you approve the purchase.
Can I buy a used or refurbished part?
Used or refurbished options may be suitable for selected assemblies, modules, wheels, body parts, or hard-to-source components. Condition, compatibility, testing, programming, and important limits are stated in the quote.
Is the first inspection free?
The initial workshop inspection is free. Advanced diagnosis, dismantling, programming, or external testing may have a separate charge, which is explained before it is performed.
Can you deliver the part?
Free pickup and delivery is available for the vehicle service. Part-only delivery, courier, special handling, and destination conditions are confirmed for the specific order rather than assumed.
What should I send to request a quote?
Send the Chevrolet model, year, part name or symptom, and a photo when safely available. You can begin without diagnosing the vehicle. We request technical details only if they are needed for matching.
Match the part before purchase
Check your Chevrolet part and fitted price
Tell us the model and what you need. We will confirm the next fitment detail, available choices, and whether workshop installation is recommended.