Need Proton service or help with a warning light, weak AC, brakes, suspension or gearbox concern? Our Al Quoz 4 garage offers a free initial workshop inspection, a written estimate before paid work, and free pickup and delivery in Dubai.
A warning light or unusual noise does not identify the failed part by itself. Describe when the problem happens, and we will check the related systems before recommending a repair.
Battery voltage, charging output, grounds, fuses, wiring, control-module communication, stored faults, and engine inputs may all affect starting. Replacing the battery or clearing a code without testing can leave the original cause unchanged.
Warm air may come from refrigerant loss, condenser airflow, compressor control, a sensor, blower operation, cabin filtration, or an air-distribution fault. We compare pressure and temperature behavior before choosing a part.
Delayed engagement, shuddering, warning messages, or irregular shifting can involve fluid condition, voltage, adaptation, wiring, sensors, mounts, clutch components, or internal wear. The transmission type and fitted controls must be identified first.
Clunks, drifting, vibration, uneven tire wear, and a loose steering feel may involve tires, wheels, alignment, bushes, arms, dampers, bearings, mounts, or steering components. The inspection follows the symptom instead of assuming one common part.
We inspect pad material, disc condition, caliper movement, hoses, fluid, warning signals, wheel bearings, and nearby contamination. A vibration under braking may require hub, wheel, tire, or suspension checks as well as friction parts.
Oil, coolant, transmission fluid, and AC refrigerant can escape from different points. The source, fluid level, operating temperature, and any secondary damage are checked before dismantling or ordering parts.
The Al Quoz 4 workshop covers scheduled maintenance and fault-based repairs. The estimate is matched to the exact job, not a generic package that includes unrelated work.
Engine oil and filter service, air and cabin filters, spark plugs, coolant, brake fluid, transmission service where appropriate, drive belts, inspection items, and maintenance reminder checks.
Misfire diagnosis, oil leaks, cooling-system faults, overheating, mounts, sensors, ignition parts, fuel-system checks, turbo-related work, cylinder-head repair, and internal engine assessment.
Gearbox fault diagnosis, fluid leaks, shifting problems, mounts, shafts, wheel bearings, control faults, clutch-related work, and repair or replacement choices after inspection.
Pads, discs, calipers, brake fluid, ABS concerns, arms, bushes, dampers, links, steering components, tires, wheel balancing, and alignment-related checks.
AC performance testing, leak inspection, condenser and compressor work, batteries, alternators, starter motors, wiring, lighting, switches, sensors, cameras, and warning-light diagnosis.
Dents, scratches, panel repair, paintwork, bumper damage, accident inspection, windscreen replacement, upholstery, trim, door mechanisms, and water-leak checks.
These market-based AED ranges help you plan. The model, parts, condition and test results can change the final price. Before paid work, your written estimate will list labor, parts, fluids, testing, exclusions, VAT and the total payable.
| Service | Estimated price | What the estimate can include | What changes the total |
|---|---|---|---|
| Engine oil and filter service | AED 350 to 750 | Correct oil grade and quantity, filter, labor, level check, and routine inspection | Engine, oil specification, capacity, filter type, and overdue items |
| Computer diagnosis | AED 250 to 650 | Relevant system scan, fault review, live-data checks, and initial electrical or mechanical direction | Number of systems involved and testing time |
| Front brake pads | AED 550 to 1,200 | Pads, fitting, hardware check, disc and caliper inspection, and road verification where suitable | Model, pad choice, sensors, disc condition, and caliper work |
| Brake pads and discs per axle | AED 1,250 to 2,600 | Matched pads and discs, installation, cleaning, inspection, and final checks | Part grade, disc size, hardware, and hidden damage |
| Battery replacement | AED 450 to 1,150 | Suitable battery, installation, charging-system check, and reset support where required | Battery size, technology, access, and electrical faults |
| AC diagnosis and refrigerant service | AED 300 to 750 | Temperature and pressure checks, visible leak inspection, measured refrigerant service when suitable | Leak testing, refrigerant type, electrical faults, and failed components |
| Suspension arm or bush repair | AED 650 to 1,850 | Affected component, labor, nearby joint inspection, and alignment advice | Side, component assembly, seized hardware, and alignment |
| Transmission fluid service | AED 850 to 1,850 | Specified fluid, filter or sealing items where applicable, labor, level procedure, and checks | Transmission type, fluid quantity, pan or filter design, and existing faults |
| Engine mount replacement | AED 750 to 2,200 | Affected mount, labor, and vibration recheck | Mount position, hydraulic or electronic design, and access |
| Major engine or transmission work | Quoted after diagnosis | Measured repair plan, selected parts, labor, fluids, setup, and final testing | Internal condition, repairability, parts supply, and replacement choice |
Tell us the model and the service or symptom. A photo can help but is optional. The initial workshop inspection is free; we explain any paid testing and send a written estimate before work begins.
Start with two detailsProton model + what the car needs
Tell us what changed and when it happens. A problem that appears cold, in traffic, under braking, at one speed, or after rain gives the inspection a useful starting point.
A fault code tells us which system noticed an issue. We compare it with the car’s behavior and measured results before recommending a part.
We review warning lights, noises, leaks, and the conditions in which the fault appears.
Scan data is compared with battery voltage, connectors, wiring, fluids, visible condition, and mechanical movement. Pressure, temperature, compression, smoke, charging, or road tests are used when relevant.
We distinguish a failed part from a weak supply, poor connection, leak, worn mount, or earlier repair issue. You review the recommended work and estimated total before paid dismantling or replacement.
The correct choice depends on the confirmed condition. A service should not be sold as a repair for an active fault, and a major assembly should not be replaced when a smaller verified repair can solve the problem.
Choose maintenance when the vehicle is operating normally and a time or mileage item is due. The service can include specified fluids, filters, plugs, belts, inspection items, and resets appropriate to the model and engine.
This is suitable when testing isolates a worn, leaking, damaged, or electrically failed component. The estimate identifies the affected part, related seals or fluids, labor, and any required setup or final testing.
Major work is considered when internal wear, severe heat damage, loss of compression, bearing damage, extensive gearbox wear, or structural damage makes a smaller repair unsuitable. Repair and replacement costs are compared before approval.
When comparing estimates, check that each quote covers the same labor, parts, fluids, programming, testing, VAT and warranty terms. We explain the full scope before you approve work.
These three typical job estimates show how model, parts and related work affect price. They are examples, not completed customer jobs. Your written quote will identify VAT and the total payable before you approve work.
Work: Engine oil and filter, air filter, cabin filter, spark plugs, brake inspection, fluid and leak checks, diagnostic scan, and maintenance reset where supported.
Condition: Normally running vehicle with no active warning or additional repair identified during inspection.
AED 1,250 total
Work: Front pads and discs, installation, caliper and hose inspection, cleaning, hardware check, and final brake verification.
Condition: Standard-size friction components with calipers, hubs, bearings, and brake electronics remaining serviceable.
AED 2,150 total
Work: AC performance test, pressure checks, leak inspection, replacement of one accessible leaking seal, measured refrigerant service, and final vent-temperature check.
Condition: Compressor, condenser, evaporator, blower, and climate controls remain serviceable.
AED 850 total
Parts supply can affect price and timing, especially for uncommon specifications or older imports. Genuine, OEM-equivalent, or suitable aftermarket choices may be considered when available. The selected category is stated in the written estimate.
We work on Proton sedans, hatchbacks, MPVs, and SUVs. Model names alone do not confirm the engine, transmission, brake size, electrical equipment, or market specification, so parts are matched to the individual vehicle.
Maintenance, turbo and non-turbo engine checks where fitted, brakes, suspension, AC, electrical systems, warning lights, tires, glass, and body repair.
SUV servicing, cooling and turbo-related diagnosis, gearbox behavior, driver-assistance warnings, batteries, brakes, suspension, AC, and accident inspection.
Routine care and diagnosis for the larger SUV, including its fitted powertrain and electrified support systems where applicable. High-voltage or hybrid-related work is assessed before repair planning.
Engine maintenance, starting problems, transmission concerns, mounts, steering, suspension, AC, electrical faults, brakes, tires, doors, and interior repairs.
Cooling, turbo and engine concerns where fitted, transmission behavior, family-use wear, AC output, suspension, brakes, electrical systems, and body repairs.
Maintenance and repair based on the fitted engine, gearbox, electronics, body components, and current condition. Parts references are checked before availability is promised.
Earlier-model mechanical, electrical, cooling, AC, brake, steering, suspension, transmission, and body work, with extra attention to age-related wear and parts supply.
Other current, discontinued, or privately imported Proton vehicles can be inspected. We may request the VIN or component reference later when it is needed for an accurate part match.
Service timing depends on the model, engine, transmission, mileage, age, history, and use. Short trips, idling, heat, dust, and storage can affect a car even with low annual mileage.
Check cooling performance, fluid condition, battery and charging health, hoses, AC, and signs of leaks after long idling or stop-and-go use.
Review filters, oil condition, tire wear, brakes, and the items due by the correct time or mileage schedule.
Look more closely at mounts, joints, bearings, ignition parts, seals, transmission behavior, and earlier repairs. Low-mileage cars still need time-based fluid, battery, tire, and rubber checks.
An oil service is not a complete maintenance visit. We separate due items from optional or future work. A warning, overheating, pressure concern, active leak, or mechanical noise needs its own diagnosis. The written estimate lets you approve the suitable work.
For major work, see engine repair or transmission repair.
You can begin with the model and a short description. We request the VIN, mileage, service history, warning photo, or part details later only when they help with diagnosis, safety, or parts matching.
Tell us what you need and whether the vehicle is safe to move. A photo is optional unless visible damage needs to be assessed.
Choose a workshop visit, free pickup and delivery, or discuss a dedicated on-site inspection when a mobile assessment is suitable.
We check the reported concern, identify the fitted components, and add focused testing only where the initial condition supports it.
The proposed parts, labor, fluids, testing, estimated total, and important exclusions are explained before approval.
Approved work is completed, the original concern is checked again, and workshop handover or return delivery is arranged.
Maintenance, diagnostics, mechanical and electrical repair, AC service, tires, glass, and body repair are handled at our Al Quoz 4 workshop. When a problem crosses systems, the car can be inspected in one place.
The initial workshop inspection is free. If advanced diagnosis, pressure testing, alignment measurement, AC service, fluid analysis, or dismantling is needed, we explain its price before starting.
Free pickup and delivery is available across Dubai. Tell us if the car cannot move safely, has a locked wheel, is in a basement, or has accident damage so its movement can be planned.
An on-site assessment may help with visible, electrical, or drivability concerns. Lifting, alignment, AC equipment, dismantling, and extended tests still need the workshop. We confirm mobile terms first.
Begin at the workshop without paying for the initial visual and basic condition assessment. Additional testing is discussed before it starts.
The estimate separates the approved work, parts category, labor, fluids, tests, exclusions, and estimated customer total.
When more than one suitable part or repair option exists, we explain the difference in cost, expected result, and availability.
The approved work is followed by relevant level, leak, warning, operation, temperature, brake, alignment, or road checks.
Routine oil and filter service is estimated at AED 350 to AED 750, computer diagnosis at AED 250 to AED 650, and front brake pads at AED 550 to AED 1,200. Major engine, gearbox, electrical, and body repairs vary more widely. The written estimate is based on the exact model, fitted parts, condition, and required work.
The initial workshop inspection is free. If the concern needs advanced electrical testing, pressure testing, AC service, fluid analysis, alignment measurement, extended road testing, or dismantling, that work is explained and priced before it starts.
We service models including the S70, Saga, X50, X70, X90, Persona, Iriz, Exora, Prevé, Inspira, Suprima S, Gen-2, Waja, Wira, and other suitable Proton imports. Exact repair and parts choices depend on the year, engine, transmission, trim, and market specification.
Yes. Free pickup and delivery are available across Dubai. Share the location and whether the car starts, moves, has warning lights, a locked wheel, basement access, or accident damage so appropriate movement can be arranged.
Parts choices may include genuine, OEM-equivalent, or suitable aftermarket components depending on the repair, availability, and your preference. The written estimate identifies the selected category. A part is not described as available until its reference and supply are checked.
Routine maintenance and some common repairs may be completed the same day when inspection, approval, workshop capacity, and parts align. Diagnostic, electrical, transmission, engine, body, or uncommon-parts work may require more time. The expected timing is provided after the initial check.
Yes. We scan the relevant systems and compare stored faults with live data, voltage, wiring, fluid levels, mechanical condition, and the reported behavior. A stored code guides testing but does not automatically prove that the named component must be replaced.
We provide independent maintenance and repair. Warranty conditions belong to the seller or warranty provider. If a specific warranty claim is important, review its written maintenance and repair conditions before authorizing independent work.
Yes. The workshop handles AC performance testing and repair, transmission diagnosis, fluid service where appropriate, leaks, mounts, electrical controls, and repair or replacement assessment. The system is identified before fluids or parts are selected.
Start with the Proton model and a short description of the service or symptom. A warning photo, damage photo, or video can help but is optional at first contact. We request the VIN, mileage, or history later only when needed for a safe next step or accurate match.
Send the model and tell us what the car needs or what it is doing. We will arrange a free workshop inspection, free pickup and delivery, or discuss an on-site assessment when suitable.