Focused computer diagnosis
AED 250 to 550Scan and initial tests for one reported fault. Extended wiring checks, dismantling and repairs are separate.
Independent workshop in Al Quoz 4
A warning light is frustrating enough without guessing whether the right Borgward part can be found. Bring us the symptom first. We’ll assess the fault, check the repair and parts options, and explain the cost before work starts.
Engine, cooling, gearbox, AC, electrical and chassis repairs for BX5, BX7 and BX7 TS owners, subject to parts and diagnostic access.
Oil and filter service AED 550 to 950. Focused diagnosis AED 250 to 550. Estimates; the written quote confirms the work and VAT.

These are planning estimates for the described work, not fixed offers. The model, fitted equipment, parts source and access affect the total. Confirm whether VAT is included and ask for the final payable total before approving work.
Scan and initial tests for one reported fault. Extended wiring checks, dismantling and repairs are separate.
Specified engine oil, matching filter, installation and basic inspection. Additional filters and overdue maintenance are separate.
A vehicle-specific list of due filters, fluids and spark plugs, with labor. Ask for the itemized list; this is not an all-items package.
Front-axle pad work, or pads and discs where required, with fitting and checks. Disc replacement changes the total; calipers are separate.
Testing plus the confirmed repair. A small leak or control repair differs from compressor or condenser work; the quote identifies the component.
Confirmed hose, tank, thermostat, pump, radiator or fan work with installation and testing. Internal engine damage is excluded.
Engine rebuilding, gearbox overhaul and electronic module replacement need an assessed quotation. It must identify the damage, repairable components, parts source, installation, fluids and any programming. A diagnostic fee is not a repair price.
Send the model and the work you’re considering. We can compare an existing quote by its parts and inclusions and discuss a targeted repair where that makes sense.
A pressure test can locate a leaking hose, tank or connection. If the leak is accessible and the engine hasn’t been damaged, replacing that component may be enough. Repeated top-ups leave the cause unresolved.
A harsh shift doesn’t establish that the entire gearbox needs replacing. Check the reported behavior, fluid leaks, electrical supply and relevant data before deciding whether an external repair or internal assessment is justified.
Test the air and boost system, ignition and relevant circuits before quoting a turbocharger. Boost is the extra intake pressure produced by the turbo. A confirmed hose leak may be a separate repair.
If internal wear is confirmed, compare a defined rebuild with a compatible replacement. Include removal, installation, fluids, testing and written warranty terms in both totals.

Start with BX5, BX7 or BX7 TS and the year if you know it. The vehicle identification number, or VIN, helps narrow down the build, but the installed component may still need checking.
Borgward’s Chinese-market BX7 TS specifications describe a turbocharged engine, all-wheel drive and a six-speed automatic. Those details should not be assumed for every Borgward or every market.
For a driveline vibration, tell us whether it follows road speed or engine speed. On an all-wheel-drive vehicle, the assessment may need to include the rear driveline as well as the transmission.
A battery or charging fault can affect several systems. We check the supply and relevant circuits alongside the scan results. Computer diagnostics explains the initial investigation.
Compare vent temperature, pressure and fan operation. A refrigerant leak needs locating before a recharge can provide a lasting result. Compressor replacement is only one possible outcome.
Measure pad and disc condition and check for joint or bushing play. A bushing is a flexible mounting that controls movement and vibration. Replace the confirmed worn item where the surrounding assembly remains serviceable.
Match oil, filters and other due items to the exact engine and service record. Our car service options cover routine work; a warning light or oil leak needs its own assessment.
A low component price is less useful if the connector, mounting or calibration is wrong. Before ordering, the quote should identify the part number, source and condition, plus any setup needed after fitting.
Compare genuine parts where obtainable, identified aftermarket alternatives, or a documented rebuilt assembly. A used part needs a clear condition and return agreement. Availability is checked for the actual item, not promised for the whole brand.
For an electronic module, confirm programming access before paying for the part. If the required function isn’t available, replacing hardware may not finish the job.
Each Typical job estimate below describes a possible job, not a completed customer repair. Prices depend on confirmed fitment and findings. VAT treatment and the final payable total must be confirmed in the written quote.
Typical job estimate
AED 950 to 1,650
For a confirmed external leak with no overheating damage.
Excludes radiator, pump and internal engine repairs.
Typical job estimate
AED 850 to 1,900
For a localized knock traced to a worn link or serviceable bushing.
The quote must state the quantity. Full arms, dampers and wheel alignment are separate unless listed.
Typical job estimate
AED 650 to 2,200
For a warning and reduced acceleration traced to an accessible air leak or wiring fault.
Excludes turbocharger, control module and internal engine replacement.
Stop safely for overheating, loss of oil pressure, fuel leakage, or a braking or steering control problem. Switch off an overheating engine and don’t open the hot cooling system.
For severe vibration, active gearbox slipping or a warning you cannot identify, describe the condition before setting off. Call +971 50 608 7150 to discuss safe transport.
Yes. We assess BX5, BX7 and BX7 TS maintenance and repair concerns. Parts supply and access to the required diagnostic or programming function are checked before accepting work that depends on them.
The initial workshop condition review is free. Focused computer diagnosis is estimated at AED 250 to 550. Extended testing, dismantling and repairs need a separate agreed scope. Confirm the final VAT-inclusive amount before approval.
No. Tell us the model and the problem. We can request the VIN and inspect the fitted component when identifying a replacement. Buying a part before diagnosis can leave you with the wrong item.
Only after its number, specification and required setup are checked. Matching appearance or the BX7 name alone does not establish compatibility. Electronic parts may need programming that must be confirmed before purchase.
Timing depends on the diagnosis, parts delivery and final testing. Ask for separate estimates for workshop time and parts waiting time. We do not promise a collection date before those are known.
No. Auto Repair UAE is an independent workshop in Al Quoz 4. Factory warranty decisions, campaigns and restricted software functions are outside an ordinary independent repair quotation.
Ask about free pickup and delivery when arranging the visit. A vehicle that cannot move, steer or brake safely may need recovery instead. Explain its condition and location so the transport method and any recovery charge can be agreed.
Tell us what your Borgward is doing, or which service is due. Visit Auto Repair UAE in Al Quoz 4, Dubai, or ask about free pickup and delivery.
We’ll arrange the initial check and explain any paid diagnosis before it begins. You can also browse our German car repair services.